What a cedar patio cover costs in Texas
Roofed cedar patio cover pricing per square foot in Dallas-Fort Worth and East Texas, from a signed job, with worked examples and what's not included.

Cedar pergolas, roofed patio covers and covered outdoor kitchens for Jacksonville homes. Designed, permitted, built and stained by one contractor. 2 hours 10 minutes from Royse City.
Lake Jacksonville sits just southwest of town with lake homes around its shore, and Love's Lookout on US 69 north of town looks out over the hills. Older neighborhoods fill in around downtown, and Lake Striker is a short drive south.
City of Jacksonville Development Services handles residential permits through its building inspection and permitting office. Outside city limits, Cherokee County has little or no residential permitting.
Deep sandy loam. Post footings are straightforward here as long as the ground is compacted and each footing is sized for the roof it carries.
Roofed cedar patio cover, priced off a signed job. Design and permits are one flat line. Concrete and power are only there if you need them.
| What | Includes | Price |
|---|---|---|
| Cedar post-and-beam patio cover | Western Red Cedar post-and-beam frame on engineered piers with concealed standoff bases, doubled perimeter beams, exposed rafters, corbels at every post, standing seam metal roof sloped for drainage, full stain finish. | $119/SF$20,000 minimum |
| Design, engineering and permits | Engineered plan set for a roofed structure, structural detailing of the post anchorage and roof framing, the permit application and the city's permit fees. | $2,200 |
| Reinforced concrete patio | Base preparation, forming, reinforcement, expansion joints, 4 in placement and broom finish. Patios, walkways and pads. | $19/SF$6,000 minimum |
| Outdoor electrical | Dedicated GFCI-protected circuit from the existing panel, trenched and in conduit, ending at two weather-rated outlets. Rough-in and final trim. | $1,450 |
Open-top cedar pergola. This is what a real nine-post job cost. A smaller one costs less.
| What | Includes | Price |
|---|---|---|
| Cedar pergola, open top, 9 posts | Freestanding two-layer open-top pergola in Western Red Cedar with no roof covering. Nine 6x6 posts on decorative steel bases, 2x10 beams with profiled end cuts, a rafter layer and 2x2 top purlins, knee braces at every post-to-header connection, decorative connectors, and demo of the old structure.
| $15,900 |
Full breakdown on the pricing page.
Roofed cedar patio cover pricing per square foot in Dallas-Fort Worth and East Texas, from a signed job, with worked examples and what's not included.
What a patio cover or pergola permit takes in DFW and East Texas. City permits, HOA approval, engineering, inspections, and why Blackland clay sets pier depth.
The real difference between an open cedar pergola and a roofed patio cover in Texas. Shade, rain, heat, permits and what each one costs.
City of Jacksonville Development Services handles residential permits through its building inspection and permitting office. Outside city limits, Cherokee County has little or no residential permitting.
Deep sandy loam. Post footings are straightforward here as long as the ground is compacted and each footing is sized for the roof it carries.
A cedar cover with a standing seam roof runs $119 per SF with a $20,000 minimum. Our nine-post cedar pergola job came in at $17,000 with permit and stain.
Yes. 2 hours 10 minutes from Royse City. We build pergolas, patio covers and covered outdoor kitchens in Jacksonville and across Cherokee County.
Or call 469-721-0146.