Guide
What a cedar patio cover costs in Texas
Roofed cedar patio cover pricing per square foot in Dallas-Fort Worth and East Texas, from a signed job, with worked examples and what's not included.
Farmersville, Collin County
Pergolas and patio covers in Farmersville
Cedar pergolas, roofed patio covers and covered outdoor kitchens for Farmersville homes. Designed, permitted, built and stained by one contractor. 20 minutes from Royse City.
Building in Farmersville
What to know before you build here
The Chaparral Trail runs through town on the old rail line, and Chaparral Trail Estates sits on acreage just outside it. Lavon Beach Estates is near Lake Lavon, and the older homes near the downtown square have deep lots with mature trees.
Permits and HOA
City of Farmersville Planning and Development Services issues residential permits inside the city. Outside city limits, Collin County has little or no residential permitting, which covers most acreage homes here.
The ground under the posts
Blackland clay giving way to sandier ground toward the Hunt County line. Clay lots need engineered piers under each post. Sandier lots need compacted, properly sized footings.
Patio cover pricing
Roofed cedar patio cover, priced off a signed job. Design and permits are one flat line. Concrete and power are only there if you need them.
| What | Includes | Price |
|---|---|---|
| Cedar post-and-beam patio cover | Western Red Cedar post-and-beam frame on engineered piers with concealed standoff bases, doubled perimeter beams, exposed rafters, corbels at every post, standing seam metal roof sloped for drainage, full stain finish. | $119/SF$20,000 minimum |
| Design, engineering and permits | Engineered plan set for a roofed structure, structural detailing of the post anchorage and roof framing, the permit application and the city's permit fees. | $2,200 |
| Reinforced concrete patio | Base preparation, forming, reinforcement, expansion joints, 4 in placement and broom finish. Patios, walkways and pads. | $19/SF$6,000 minimum |
| Outdoor electrical | Dedicated GFCI-protected circuit from the existing panel, trenched and in conduit, ending at two weather-rated outlets. Rough-in and final trim. | $1,450 |
Pergola pricing
Open-top cedar pergola. This is what a real nine-post job cost. A smaller one costs less.
| What | Includes | Price |
|---|---|---|
| Cedar pergola, open top, 9 posts | Freestanding two-layer open-top pergola in Western Red Cedar with no roof covering. Nine 6x6 posts on decorative steel bases, 2x10 beams with profiled end cuts, a rafter layer and 2x2 top purlins, knee braces at every post-to-header connection, decorative connectors, and demo of the old structure.
| $15,900 |
Full breakdown on the pricing page.
Is this a fit
We're probably not your builder if
- You want a kit dropped off and nothing else.
- You need a repair on a structure someone else built.
- The budget is under $20,000 for a roofed cover.
We're a fit if
- You want a cedar pergola or a roofed patio cover built right the first time.
- You want one contractor to handle design, permit, build and stain.
- You live in Dallas-Fort Worth or East Texas.
Before you call anyone
Guide
Patio cover permits, HOA approval and engineering in Texas
What a patio cover or pergola permit takes in DFW and East Texas. City permits, HOA approval, engineering, inspections, and why Blackland clay sets pier depth.
Guide
Pergola or patio cover: which one you actually need
The real difference between an open cedar pergola and a roofed patio cover in Texas. Shade, rain, heat, permits and what each one costs.
Common questions
Do I need a permit for a patio cover in Farmersville?
City of Farmersville Planning and Development Services issues residential permits inside the city. Outside city limits, Collin County has little or no residential permitting, which covers most acreage homes here.
What is the ground like in Farmersville and does it matter for a pergola?
Blackland clay giving way to sandier ground toward the Hunt County line. Clay lots need engineered piers under each post. Sandier lots need compacted, properly sized footings.
What does a patio cover cost in Farmersville?
A cedar cover with a standing seam roof runs $119 per SF with a $20,000 minimum. Our nine-post cedar pergola job came in at $17,000 with permit and stain.
Do you actually build in Farmersville?
Yes. 20 minutes from Royse City. We build pergolas, patio covers and covered outdoor kitchens in Farmersville and across Collin County.
Get a number
Building in Farmersville?
Or call 469-721-0146.